MORI TEM

Cultivar 500

Cultivar 500
2GV-3GV

Ideal for production up to 1000 kg/h

The CULTIVAR systems reflect our vision of quality. Through the supervision interface and the PLC, operators can control the plant and input specific processing recipes for each individual cultivar. All data regarding the individual processing cycles is saved in an archive to ensure complete traceability. Without a doubt, the Cultivar system is the ideal solution for companies aiming to stand out in the world of high-quality extra virgin olive oil.

Through the supervision interface and the PLC, operators can control the plant and input specific processing recipes for each individual cultivar. All data regarding the individual processing cycles is saved in an archive to ensure complete traceability. Without a doubt, the Cultivar system is the ideal solution for companies aiming to stand out in the world of high-quality extra virgin olive oil.

All data regarding the individual processing cycles is saved in an archive to ensure complete traceability.

Without a doubt, the Cultivar system is the ideal solution for companies aiming to stand out in the world of high-quality extra virgin olive oil.

CULTIVAR 1000 scaled
1

Lifting unit SRC.1

2

Belt elevator TVD_1/EN.300

3

Vibrator with roller conveyor VR_30

4

Idrolava 30 washing machine

5

Idrolava dryer

6

Perforated belt elevator ENF.300

7

Electromechanical olive collection system

8

Crusher FR.350 Flavour

9

Cultivar GV_400 Malaxer

10

Washing unit 2GV

11

Hot cold unit C2-W13

12A

Supervision totem

12B

Electrical panel

13

Decanter DMT.12

14

Single oil vat CP.2S_100 mono

15

Filter 40x40 EUR 20

16

Piston pump PP.130

17

Pit separator SN.1500

18

Piston pump PP.130

19

Elevator ELN_100 pit discharge

Olive collection and weighing

The olive collection tanks are equipped with a hopper inside which a feeder with variable speed rotates and also a vibrator for very dirty olives

This system allows the olives to be unloaded easily and safely in a short time, improving working conditions for the operator.

The tanks can be equipped with load cells for weighing olives.

In the CULTIVAR SMT version, the weight is acquired directly.

A belt elevator transports the olives to the cleaning section.

Olive cleaning

The LEAF REMOVER is indispensable for the quality of the final product.

With today’s harvesting systems, this often leads to a situation of up to 20% dirt in the olives, leaves, branches and other things.

The energy-efficient rotary system can remove 99% of the dirt.

A large double basket rotates at low speed, releasing the leaves and branches, which are discharged into the final part of the machine by a blower and discharged outside by an auger.

A belt elevator, equipped with a variable speed drive, transfers the olives to the washing machine.

As an optional extra, a belt elevator is provided to transfer debris, leaves, soil and more on the trolley for disposal.

If the olives are not excessively soiled, the leaves are vacuumed at the head of the belt elevator and then moved to a vibrator for soil and dirt discharge, finally into the roller conveyor for the last selection before moving on to the washing machine.

Olive washing and drying

Our washing machines with their various accessories can also condition the temperature of olives.

IDROLAVA washing machines wash the olives by means of water and air; the air acts tangentially to the flow, allowing effective cleaning of the olives, thus safeguarding their integrity.

If there is a need for cooling, the olives are passed through a pipe with cold water, which lowers the temperature of the olives by about 5 degrees.

With this system, more fragrant oils are obtained.

The structure of the machine has a tube-in-tube exchanger inside the tank for conditioning the olive movement water.

The olives finally pass under a shower of clean water to further improve cleanliness before proceeding through a perforated belt to the drying stage.

Drying by air jets eliminates the washing water that remains on the olive by dragging; this step improves the quality of the final product.

The conditioned and dried olives are discharged into a hopper that is the entry point of the crushing process.

Crushing and pitting

Crushing is the first stage in the process of turning olives into oil; for us, this is the most important stage.

Through crushing, aromas develop and biophenols are formed.

Our FLAVOUR system provides for differentiated crushing by means of hollow knives and a grid with anti-heating channels.

The entire crusher, including the pump, is conditioned for maximum flavour.

A wide range of grids and types of knives identified for each individual cultivar allow us to achieve the highest quality.

The speed of the impeller ranges from 2000 to 4000 rpm, an independent cleaner cleans the perforated grid externally to avoid paste build-up at the outlet.

The crusher is equipped with an automatic washing system with low water consumption.

When the plant works with the linear system, the crusher consumes 30% of the total installed power.

The pitting machines are specially designed to separate olives from pits and to produce oil from pitted paste.

The machines consist of an olive loading hopper equipped with a variable speed feeder.

The olives arrive inside the perforated basket where a beater with 3 fins separates the product by letting the pitted paste come out from underneath and the pits from the opposite side; a cleaner always keeps the grid free and an auger feeds the pump that sends the pitted paste to the vertical units.

Paste preparation

CULTIVAR vertical units are equipped with temperature control by means of a thermal jacket conditioned by the plate heat exchanger.

The vacuum system can modify the headspace by making a slight depression.

It is possible to activate a continuous processing system, by passing the paste continuously from the crusher to the vertical units and the decanter; in this case there is a 30% energy saving on the entire plant.

The enzyme activities responsible for flavour production find optimal temperatures between 15°C and 25°C.

In conclusion, the process variables that we can constantly control with the vertical system play a very important role in determining quality, as temperatures and oxygen control play a decisive role.

In addition, vertical units equipped with inverters to vary the reel speed allow us to optimise processing, but above all to save energy by adjusting the speed, thus considerably reducing working time.

The paste discharge pumps mounted on each vertical unit are equipped with inverters to vary the flow rate.

Vertical units

Plant washing

A special tank equipped with a float for filling with water and a high-pressure, low-consumption pump is used for washing the malaxer crusher.

A special pump recovers the dirty water from the normal working circuit to avoid clogging.

A rotating washing head mounted under the opening cover of the malaxer sprays water under pressure in every direction and washes the malaxer from top to bottom and in the opposite direction automatically in about 4 minutes.

Washing can be operated automatically and manually from the controls on the main electrical panel or from the touch screen in the SMT version.

The washing unit is useful for speeding up the cleaning of the plant in order to increase the quality of the oil produced by completely removing residues from the processing.

Washing unit

Product conditioning

The hot-cold unit is now indispensable in the mill, especially in hot areas. The unit is equipped with a storage tank where water is brought from 5° to 40°C by means of a heat pump.

A special pump circulates the water, which passes over the plate heat exchangers mounted on each individual machine from the washing machine to the crusher to the vertical units and, on request, also to the decanter.

The hot/cold unit is useful to increase the quality of the EVO oil by bringing the olives and subsequently the paste into the optimal temperature range to develop the aromas and form the biophenols.

Plant management panels

The plant can also be controlled by a basic electromechanical panel with temperature controller.

The CULTIVAR SMT control panel, in addition to containing all necessary power and control circuits, is equipped with a PLC embedded in an integrated system for production control and automation.

It is possible to insert a PLC to interconnect the electrical control panel of the oil plant to management systems dedicated to Industry 4.0, either on the electromechanical panel or on the panel with CULTIVAR SMT software.

Cultivar panels

Supervision

The system manages: temperature control, processing times, speeds, pressures and slight depression in the malaxer; all this while saving the data in an exportable archive for any processing and traceability statistics.

With the use of supervision, the entire mill can be programmed to perform the best processing, for any type of olive, according to its degree of ripeness and temperature.

Processing is managed by creating a job and then the batch, which is nothing more than the individual vertical unit being processed; a job consists of one or more batches.

The “recipe” represents the set of parameters to be set for all machines in order to obtain the desired machining. By creating and reusing stored recipes, it will be possible to process the same olives, of the same type or from the same customer, in a homogeneous manner, thus guaranteeing the highest degree of quality on a consistent basis.

Extraction

DMT decanters are designed to prevent overheating of the paste during extraction and are easily washable.

Decanter models up to DMT_15 are unidirectional, DMT_20_30 are bidirectional. All decanters are controlled by inverters for speed management.

The DMT_12 can be supplied with the Backdrive system, which allows the speed variation of the auger and cylinder to be managed separately.

Unidirectional models can also work without the use of a final separator; they go directly to filtration.

With the unidirectional system, the paste enters at the beginning of the decanter and the oil exits at the end of the cylindrical part, using the entire length of the drum for separation; this solution allows us to increase the flow rate by 30% compared to the bidirectional system, with considerable energy savings.

The most significant quality variables during the extraction phase relate mainly to the amount of water used, the duration of the process and the working temperature.

The application of each process adopted results in a greater or lesser change in the oil’s chemical composition, aromatic characteristics and sensory and nutritional characteristics.

Separation

Centrifugal separators in our system are only recommended for third-party processing or for our DMT_20 and DMT_30 decanters.

On the company’s plants, it is possible to filter the oil coming out of the decanter live.

Vertical separators clarify the oil by exploiting the centrifugal force developed by the high speed. They are equipped with an electronic system for start-up and speed control.

The oil leaving the separator is clarified and ready for storage or filtration (always recommended).

Separator
Vat

Oil and filtration

The oil recovery vats at the outlet of the decanter have two sectors and allow the batches to be separated into two separate tanks. The tank is fitted with a single-screw pump with inverter to regulate the outflow. A stainless steel connection pipe allows the oil to be drawn from the tank by selecting the tank via a manual or actuated stainless steel valve.

With the VPO vat it is also possible to automatically weigh the oil leaving the decanter and manage the data with the SMT software.

Filtering EVO oil is an essential operation to remove residual water in the oil and must be carried out immediately after extraction.

In the absence of the final separator, the filter is part of the plant flow diagram. Filtration is carried out with a cellulose plate filter of suitable weight and porosity.

Freshly extracted oil contains water, nutrients and microorganisms that can quickly cause sensory defects of sludge and rancidity.

Filtration gives sensory stability and long life to EVO.

Pomace management

Via a tank located below the decanter outlet, the pomace is sucked in and pumped outside the mill.

For smaller productions and distances up to a maximum of 15 m the PSS.1 / PSS.2 / PSS.3 / PSS.4 pump is installed, while for larger productions and distances the piston pump is installed.

The outlet pipe is DIN-connected to facilitate cleaning.

Pomace pump

Pit separation

Pit separators are mounted at the end of the line, usually outside the crusher; they separate the pit from the pomace. The machines consist of a pomace loading hopper, equipped with a variable speed feeder.

For pomace with a moisture content above 50% there is no need to add water.

The percentage of recovered pits varies between 8 and 12% of the quantity of processed olives.

For smaller productions and distances, PSS.1 or single-screw pumps are used, while for larger productions and distances, piston pumps are used to remove the pomace.

n addition, it is possible to combine an auger elevator or a fan for discharging the pit, which comes out dry and ready for use in the boiler.

Pit separators

Do you need more information?

We offer a range of solutions that are always up-to-date, ready to satisfy the production and quality needs of the market